![background image](http://html2.mh-extra.com/html/omcan/fp-it-0006/fp-it-0006_instruction-manual_5153230011.webp)
11
Installation
Operation
manufacturer (in these cases, the machine is supplied without a mains plug). If you need to stretch the power
cable, use a cable of the same section as the one installed by the manufacturer.
CONTROLS AND INDICATORS
lIST OF COnTrOlS AnD InDICATOrS (FIg. 4.1.1)
1. Start button (continuous).
- Press the button to start the machine.
2. Stop button.
- Press the button to stop the machine.
STARTING AND STOPPING THE MACHINE
CHECKING THE ELECTRICAL CONNECTION
Switch the circuit breaker installed upstream of the machine to “I”. Press the start button (“1” Fig. 4.1.1),
checking the direction of rotation of the tools (380 three-phase version). The blades must turn clockwise. If the
direction of rotation is counter-clockwise, disconnect the machine from the power supply and contact the dealer
nearest to you.
note: in machines connected to a single-phase line and configured for this type of power supply, the
correct direction of rotation is defined directly by the manufacturer.
CHECKING FOR PRESENCE AND EFFICIENCY OF SAFETY GUARDS AND DEVICES
1. Tool protective lid (Fig. 5.2.1). Visually check for the presence and integrity of the protective lid.
2. Microswitches (Fig. 5.2.1).
2a. With machine running, turn the lid lock knob counter-clockwise: the machine must stop.
2b. Remove the tank and try starting the cutter: the machine must not work. If it does when performing this
operation, contact an authorised dealer or directly the manufacturer.
IMPORTANT!
In the case of absence, defects or incorrect adjustment of the casing, or in case of incorrect functioning of the
safety devices listed above, turn the machine off and contact customer service to restore the machine to its
original settings.
MACHINE START-UP
Turn the circuit breaker that supplies power to the machine from “0” to “1”. Press start button “1” (Fig. 4.1.1),
thus activating tool rotation.
Содержание FP-IT-0006
