Omcan DB-25HD, Инструкция по эксплуатации

Страница: 10 / 20

10
Troubleshooting
The machine turns on but when
the product is placed on the disc, it
stops or spins in low rotation.
Skidding belts or problems with the
electric motor.
Call a qualified technician.
Strange noises. Abrasive Disc is misplaced. There
are damaged ball bearings.
Place the Abrasive Disc
appropriately on the Central Shaft
Pin. Call a qualified technician.
Water leak in the bottom of the
machine.
Damaged retainer. Call a qualified technician.
ADJUSTMENTS AND REPLACEMENT OF COMPONENTS
The Abrasive Disc is covered with an aluminum oxide layer responsible for the food peeling. After some time,
the aluminum oxide wears out and the efficiency of the machine decreases. The Abrasive Disc must then be
replaced.