7
Installation
The Potato Peeler must be installed onto a stable working surface. Verify the voltage of the power source it will
be connected to (110V). The power cord has two (2) flat pins and one (1) round pin for grounding (ground wire
pin). It is mandatory that the three pins are properly connected before using the equipment. It is recommended
to install the machine close to a sewer or to canalize the residues by extending the Exit Tube (Pic. 1, #9)
located on the lower part of the machine.
IMPORTANT
Make sure the Abrasive Disc (Pic. 1, #7) is well placed on the Central Shaft Pin (Pic. 2, #2) before switching
the machine on.
Check if the Potato Peeler is firm in its position. Install the water entrance and exit. Check if the inner abrasive
disc walls are properly placed. Observe the link attachment with the lock (Pic. 2, #3).
Operation
IMPORTANT
Under no circumstances touch the Abrasive Disc when it is in moving. Secure the lid (Pic. 1, #5), open the
water tap, set the timer (Pic. 1, #6) and activate the ON/OFF switch (Pic. 1, #3). With the machine on, pour
the product to be processed inside it. For the DB-25HD, put 25 Kg of potatoes at most. The working time
varies from one (1) to five (5) minutes. If the potatoes are being peeled to irregularly, it is possible to observe
the process through the lid opening. To remove the peeled product, keep the machine running and open the
Door (Pic. 3, #1) by pulling the lock (Pic. 3, #2 upwards. Lift it until the side lock (Pic. 3, #3) and keep the door
(Pic. 3, #1) open. This way the product will be expelled. To close the door, release the side lock (Pic. 3, #3) by
pulling it sideways.
Содержание DB-25HD
