Omcan DB-25HD, Инструкция по эксплуатации

Страница: 8 / 20

8
Maintenance
Keep the machine clean. Always TURN THE MACHINE OFF by removing the plug from the socket before
cleaning it. Never clean the machine unless it has come to a complete stop. Put all components back to their
functional positions before turning it ON again. Do not place your fingers in between belts, pulleys, chains and
gears.
DANGER
Every maintenance operation is dangerous when the machine is ON. TURN IT OFF BY PULLING THE PLUG
OUT OF THE SOCKET DURING MAINTENANCE.
IMPORTANT
Always remove the plug from the power point in any case of emergency.
CLEANING
To conduct the proper cleaning of the machine, follow the instructions below:
1. Remove the internal lining (Pic. 5, #1) by lifting it upwards. Clean this part with plenty of water.
2. Turn the empty machine on and let it function for a few minutes while adding water.
3. Switch OFF the machine and unplug it, then wait until the Abrasive Disc (Pic. 7) has stopped moving
completely.
4. Rub the external part of the machine with a wet cloth.
5. Remove the Abrasive Disc (Pic. 7, #1) by lifting vertically.
6. Use a brush with nylon bristles and plenty of water to clean the disc.
7. Replace the internal lining, minding the lock attachment (Pic. 6, #1).
8. Replace the disc on the machine proceeding inversely. Make sure the disc fits proper to the pin of the
central shaft.
Operation
Do not operate the machine with long hair which might touch any part of the machine because it may lead to
serious accidents. Tie your hair up well and/or cover your hair with a scarf. Only trained or skilled personnel
shall operate this machine. NEVER operate the machine without all original safety devices in perfect condition.