manualshive.com logo in svg
background image

7

Technical Specifications

Installation

Model

IC-CN-0060

Ice Production

200 lbs. / 90 kgs. per day

Bin Capacity

70 lbs. / 31.8 kgs.

Power

420 W

Ice Shape

Cube

Refrigerant

R290

Electrical

110V / 60Hz / 1

Max Ambient Temp Rating

32°C / 90°F

Water Temperature

8° - 32°C / 46.4° - 90°F

Water Pressure

0.14 - 0.55 mpa

Dimensions

28” x 25.5” x 37.3” / 711 x 648 x 946mm

Packaging Dimensions

28.3” x 27.2” x 37.8” / 720 x 691 x 960mm

Weight

114.6 lbs. / 52 kgs.

Packaging Weight

127.9 lbs. / 58 kgs.

Item Number

31780

IMPORTANT

• 

The manual is an integrated part of the product and should be kept and preserved by the users for future 

reference. Please read the instructions carefully for correct installation method, safety warnings and 

maintenance information of the product.

• 

This ice maker is designed for commercial use and should be used for purpose for which it has been 

expressly designed. Any other use should be considered improper and therefore dangerous. The 

manufacturer will not be liable or responsible for any damage caused by improper, incorrect and 

unreasonable use.

WARNING

The installation must be carried out by qualified personnel, in accordance with current regulations, and as per 

the manufacturer’s instructions.

UNPACKING

WARNING

Keep the packing material out of reach of children, (such as plastic bag, polystyrene, etc.)

• 

Remove shipping carton, tape and packing. If packing material is left in the ice maker, it will not work 

properly.

• 

After removing the packing, make sure the ice maker is in good condition. If in doubt, please do not use the 

Содержание 31780

























Отзывы: