Omarv TSR MEGA 320, Руководство по эксплуатации и обслуживанию

Страница: 24 / 34

24
ROTOR CHECKS ROTOR CHECKS ROTOR CHECKS ROTOR CHECKS
It is necessary to check the presence and efficiency of all the cutters on the rotor
each day (used or broken cutters must be replaced at the same time as those
diametrically opposite on the rotor).
W
W W W
ARNING ARNING ARNING ARNING
!!!! The absence of a cutter may cause the rapid deterioration of the
rotor and cause vibrations. A cutter of 860g at a speed of 500 rpm exerts a force
of 500 Kg on the rotor!
C
C C C
AUTION AUTION AUTION AUTION
!!!! These operations must be undertaken slowly and with the greatest
care in compliance with the safety regulations laid down in this manual.
REAR COWLING POSITION
REAR COWLING POSITION REAR COWLING POSITION REAR COWLING POSITION
Closed cowling (standard) permits:
•
A partial recycling of the shredded material and therefore improved
working quality
•
In this case the power required is slightly greater
Open cowling with flaps (option) permits:
•
Good distribution of the shredded product on the ground
•
A reduced power requirement
SHREDDING QUALITY / REQIORED POWER SHREDDING QUALITY / REQIORED POWER SHREDDING QUALITY / REQIORED POWER SHREDDING QUALITY / REQIORED POWER
In all cases, the work quality and the power required depend on:
•
The type of product to be cut and its humidity
•
The type of cutter used
•
Whether the product is to be recycled or not (open or closed cowling)
•
The working height
•
The tractor advance speed