Omarv TSR MEGA 320, Руководство по эксплуатации и обслуживанию

Страница: 12 / 34

12
Always select the rotor stop position, before removing the PTO shaft from a
tractor with a completely independent PTO.
Undertake a daily check on the nuts, bolts, hoses and other fixture system, to
make sure that there are no defects, loosening or breakage that may jeopardize
the machine safety. In the event that such a problem is fund, immediately
repair or replace the defective part.
Any maintenance, repair or control operation must be undertaken with the
machine at a complete standstill and isolated from the tractor PTO. The
ignition key of the same must be removed. Always position the machine on
props or blocks when carrying out these operations, in order to prevent the risk
of the tractor falling from its raised position.
It is compulsory that all operations described above must be undertaken in full
respect of the regulations contained in the present paragraph. Negligence or
carelessness may cause a risk for your safety and for that of the accompanying
personnel
.