Omarv TSR MEGA 320, Руководство по эксплуатации и обслуживанию

Страница: 30 / 34

30
GOING ONTO THE ROAD GOING ONTO THE ROAD GOING ONTO THE ROAD GOING ONTO THE ROAD
1.
Before beginning work check all the nuts and bolts and then again after the
first 50 working hours.
2.
correctly connect the machine to the tractor
3.
check that the PTO running speed is at 1000 rpm
4.
insert the PTO with a slow running speed, with the wheels resting on the
ground and the machine horizontal.
5.
go forward by a few metres and check the cutting height. Adjust if necessary.
C
C C C
AUTION AUTION AUTION AUTION
!!!!
All the greasing, lubrification, maintenance, repair, parts
substitution, setting onto the road operations must be carried out slowly with
the greatest care in compliance with safety regulations of this manual. Failure
to respect even one of these regulations may cause serious injury or death to the
operator or the accompanying personnel.