Chapter 3 Preparation and Inspection
25
OSF TYPE V60 OPERATION MANUAL
3.5
Preparation, Inspection and Connection of
Ancillary Equipment
Preparation and Inspection of Ancillary Equipment
Attach the Water Container (MD-431) to the specified
receptacle. If the Water Container is attached anywhere else,
water may drip from the Water Container’s Water Supply
Tube, and can impair the performance of the equipment.
Only Water Container (MD-431) should be used with this
endoscope. This Water Container is not designed for use
with models other than this endoscope and
10/20/30/100/130/200/230 Series endoscopes.
Prepare and inspect the Video System Center, Display Monitor, Water Container,
Suction Pump and Endo-Therapy Accessories according to their respective
instruction manuals.
Connection of the Endoscope and Ancillary Equipment
• Firmly connect the Suction Tube to the Suction Connector. If
the Suction Tube is attached improperly there is a danger
that fluid may drip from the tube, which can impair the
performance of the equipment.
• Do not attach or remove the Endoscope Connector with your
finger on the Water Resistant Cap Holder (as shown in
Figure 3.11), to avoid damaging it.
Figure 3.11
Содержание V60
Страница 2: ......
Страница 13: ...Chapter 1 Checking the Package Contents 9 OSF TYPE V60 OPERATION MANUAL...
Страница 51: ...Chapter 5 Troubleshooting 47 OSF TYPE V60 OPERATION MANUAL...
Страница 58: ......