Shooting
2
45
EN
Using a
fl
ash (Flash photography)
You can use a
fl
ash when shooting.
1
Press the
#
(
I
) button.
2
Highlight a
fl
ash mode using
HI
or the control dial and press the
Q
button.
AUTO
Flash Auto
The
fl
ash
fi
res automatically in low light or backlight
conditions.
#
Fill In
The
fl
ash
fi
res regardless of the light conditions.
0
Redeye
The
fl
ash
fi
res so that the red-eye phenomenon is
reduced.
$
Flash Off
The
fl
ash does not
fi
re.
1
Red-Eye Slow
Slow synchronization
(1st curtain/Red-eye
reduction
fl
ash)
The slow synchronization is combined with the red-eye
reduction
fl
ash.
2
Slow
Slow synchronization
(1st curtain)
The
fl
ash
fi
res with slow shutter speeds to brighten
dimly-lit backgrounds.
3
,
4
etc.
Manual Value
Control
fl
ash output manually. If you highlight [Manual
Value] and press the
INFO
button before pressing the
Q
button, you can adjust
fl
ash output using
FGHI
or the control dial.
#
RC
Remote Control
The dedicated underwater strobe or the Olympus
wireless RC
fl
ash is used to take pictures. For details,
see “Taking pictures with the Olympus Wireless RC
Flash System” (P. 125).
q
LED On
The LED turns on when a picture is taken. This is
effective for taking close up pictures.
• In [
0
(Redeye)], after the pre-
fl
ashes, it takes about 1 second before the shutter is
released. Do not move the camera until shooting is complete.
• [
0
(Redeye)] may not work effectively under some shooting conditions.
• The shutter speed becomes slower in [
2
(Slow)]. Use a tripod and secure the camera.
• Some features may be unavailable depending on the shooting mode and camera settings.
g
“List of Settings Available in each Shooting Mode” (P. 136)
Содержание TG-6
Страница 165: ......
Страница 166: ...WD639600 date of issue 2019 05 ...