background image

Get to

know myFirst

Camera 3

USER MANUAL

Press and hold the Power button to 

turn the camera on or off. After 

booting, tap it as the Return button.

Please insert the Micro SD card into 

the slot in the correct direction as 

shown on the left.

Press the Lens-Switcher button to 

switch the front and rear camera.

Press and hold the Up or Down button 

to enter Macro mode. Press again to 

exist.

Tap the Shutter button to take a photo. 

Press and hold the Shutter button for 2 

seconds to start recording.

Booting and Shooting

Press the Left or Right button to 

browse files. Press the Shutter to play 

the video.

To browse your photos and videos, 

press the Down button to enter the 

playback mode.

In playback mode, press the Up for the 

deletion menu. Press the Shutter to 

confirm your selection, and Power 

button to cancel.

When browsing photos, tap the 

Shutter button to zoom in and the 

Power button to zoom out.

During the zooming, press and hold 

the Left, Right, Up or Down button to 

adjust the position.

Browsing Files

1. The camera automatically shut down, when the camera is 

turned on, and not operated within one minute.

2. When the camera indicates that the battery is low, please 

use the MicroUSB charging cable and connect it to the 5V 

power converter for charging. The red light is on when 

charging, and the red light is off when the battery is full.

3. When the camera does not work correctly, do not 

disassemble it yourself. Press the pin inside the reset hole to 

reset your camera.

4. Do not drop or squeeze the camera to avoid damage to 

internal electronic components.

5. Do not expose the camera to water or splashing water to 

avoid damage to internal electronic components.

Notes

1. Tap the Up button to enter the settings menu.

2. Tap the Left or Right to choose different options, including 

date and time, language, sound, and formatting. (Formatting 

can erase all files, please be cautious)

3. Press the Shutter button to confirm your selection, and 

Power button to cancel.

Settings

Icons Glossary

1. During photo-taking, press the Left or Right button to select 

different camera modes, including photo frames, continuous 

shooting, self-timer, filters, and grid.

2. In different camera modes, press the Power button to return 

to the standard camera mode.

3. In the self-timer and continuous shooting mode, press the 

Up button to change durations.

Camera Modes

3 shots

continuously

2 secs

timer

2 secs

a shot

5 secs

a shot

10 secs

a shot

5 secs

timer

10 secs

timer

Lens-Switcher

LED Light

Speaker

Shutter (OK)

Power (Return)

Micro USB

Reset
MicroSD Slot

Setting (Up)

Left

Right
Playback (Down)

Summary of Contents for myFirst Camera 3

Page 1: ...USB charging cable and connect it to the 5V power converter for charging The red light is on when charging and the red light is off when the battery is full 3 When the camera does not work correctly do not disassemble it yourself Press the pin inside the reset hole to reset your camera 4 Do not drop or squeeze the camera to avoid damage to internal electronic components 5 Do not expose the camera ...

Page 2: ... au convertisseur de courant 5V pour le chargement Le voyant rouge est s allume lors du chargement et s éteint lorsque la batterie est pleine 3 Lorsque l appareil photo ne fonctionne pas correctement ne le démontez pas vous même Appuyez sur la goupille à l intérieur du trou de réinitialisation pour réinitialiser votre appareil photo 4 Ne laissez pas tomber et ne serrez pas l appareil photo afin d ...

Page 3: ... conéctelo a un conversor de energía de 5V para hacer la carga La luz roja se enciende durante la carga y se apaga cuando la batería está completamente cargada 3 Cuando la cámara no funciona correctamente no la desarme usted mismo Presione el pin dentro del orificio de restablecimiento para reestablecer su cámara 4 No deje caer o presione la cámara para evitar dañar los componentes electrónicos in...

Page 4: ...分以内に操作が でき ません 2 バッテリーの残量が少ないこ とがカメラで示されたら Micro USB充電ケーブルを使用し 5V Micro USBポー トに接続し て充 電し てく ださい 充電中は赤色のライ トが点灯し バッテリーがい っぱいにな ったら赤色のライ トは消灯し ます 3 カメラが正し く動作しないと思う場合は 自分で分解しないでく だ さい リセッ トボタン のピンを押し て カメラをリセッ ト し てく だ さい 4 myFirst Camera 3 内部には精密な電子部品があり ます 落と したり 強い衝撃を与え ないでく ださい 故障の原因とな り ま す 5 myFirst Camera 3 を雨や水滴にさ らさないでく ださい 故障 の原因となり ます 1 上ボタン を押し て 設定メニューに入り ま す 2 左または右ボタンを押し て 日付 時刻 言語 音...

Reviews: