Olympus MVX10, Инструкция по эксплуатации

Страница: 21 / 56

17
MVX10
4
Using the Eye Shades
(Fig. 13)
When Wearing Eyeglasses
Use with eye shades in their normal folded-down position. This will pre-
vent eyeglasses from being scratched by the eyepieces.
When Not Wearing Eyeglasses
Extend the folded eyeshades in the direction of the arrow. This makes
observation easier by preventing the inverse incidence of light from be-
tween the eyepieces and your eyes.
5
Mounting the Eyepiece Micrometer Disk
(Fig. 14)
Fig. 13
Fig. 14
6
Selecting the Light Path
(Fig. 15)
Slide the light path selector lever @ to select the desired light path.
7
Switching the Monaural/Stereo View
(Fig. 15)
Fig. 15
@
²
³
Light path selector lever Indication Intensity Ratio
Pulled out
Pushed in 100% for binocular assembly.
100% for TV observation and
photomicrography.
}Slide the mono/stereo selector lever ² for stereo observation based on
pupil division.
Mono/stereo selector lever Indication Observation
Pushed in
*
Stereo
Pulled out Standard
* The brightness of the peripheral section of the field becomes insufficient
when the aperture iris diaphragm knob ³ is stopped down.
STEREO
MONO
@
²
When the WHN10X-H eyepieces are used, an eyepiece micrometer disk
can be mounted.
Use 24 mm dia. x 1.5 mm thick micrometer disks.
Following Fig. 14, turn the built-in micrometer-mounting frame ² to the
arrow direction to remove it from the eyepiece and place a micrometer
disk @ into the mounting frame so that the surface with the model indi-
cation faces downward.
}The micrometer-mounting frame may be tight for certain micrometer disks.
In this case, turn the frame by holding the circumference with a light,
uniform force or by applying the frame against a rubber sheet. Do not
grasp the frame with a strong force, as this may deform the frame and
make it harder to remove it.
Re-attach the micrometer mounting frame in the original position.
}Be careful not to touch the lens surface with your finger.