Olympus MAJ-2306, Инструкция по эксплуатации, Страница: 25 / 80

4.2 User preset
21
MAJ-2306 INSTRUCTION MANUAL
Ch.4

Changing the iris area
Set the area in which the image brightness is measured.
In advance, be sure to perform the procedure in “
 Opening the basic image adjustment
screen” on page 19.
Table 4.3
NOTE
Use the “Center” setting when the brightness of the observed region is
inappropriate due to the part other than the image enter (when it is too bright or
dark).
Setting Description
Full Measuring is applied to the entire image.
Center Measuring is applied by putting priority on the image center.
1
Tap the “Pull-down” button to switch and select
the setting.
Figure 4.6
2
Confirm that the selected iris area is displayed
in the window.
Figure 4.7
Pull-down
Iris area window