Olympus MAJ-2306, Инструкция по эксплуатации, Страница: 21 / 80

4.1 List of setting functions for optimum use of equipment
17
MAJ-2306 INSTRUCTION MANUAL
Ch.4
Chapter 4 Function Setup
This chapter describes how to set up the functions on the touch panel of the surgical microscope
before use.
Before turning the LED light source and surgical microscope ON, read their instruction manuals
carefully and heed the instructions given in them.
This section lists the settings required for optimum use of this instrument and the ancillary equipment
connected to it.
Table 4.1
4.1 List of setting functions for optimum use of
equipment
Setting Description
Custom switches Assign functions to the custom switches.

Refer to “  Setting the custom switch” on page 18.
Iris area Set the area in which the image brightness is measured.

Refer to “

Changing the iris area” on page 21.
Iris sensitivity Set the brightness control speed.

Refer to “

Changing the iris sensitivity” on page 23.
NBI brightness Set the NBI brightness.

Refer to “  Adjusting the NBI brightness” on page 27.
NBI AGC MAX gain Set the maximum value for the electrical enhancement of NBI
brightness.

Refer to “  Setting the NBI AGC MAX gain” on page 28.
NBI color tones Set the tones and chroma of red and blue colors in the NBI.

Refer to “  Adjusting the NBI color tones” on page 31.
NBI color mode Switch the color mode settings pre-registered in the surgical
microscope.

Refer to “

Setting the NBI color mode” on page 33.
NBI enhancement Set the degree of image structure or contour enhancement when
this is used.

Refer to “  Selecting the NBI enhancement” on page 35.

Refer to “

Setting the NBI enhancement mode” on page 36.
Data display Set the display of data on the observation monitor.

Refer to “  Setting the data display on the observation monitor”
on page 39.