Olympus LF-TP, Руководство по эксплуатации, Страница: 36 / 60

32
Chapter 3 Preparation and Inspection
LF-TP/DP/GP OPERATION MANUAL
5.
Put the Lamp Holder into the Miniature Light Source aligning the Electrical
Contact with the ditch inside the Lamp Holder.
Figure 3.17
6.
Rotate the Lamp Holder clockwise until it stops.
Replacement of the Battery
Use only a CR123A or DL123A Lithium Battery. Other types
of batteries may leak, which could lead to fire or burns.
Do not allow liquids to enter the Miniature Light Source while
the battery is being replaced. If liquid gets on or inside the
Miniature Light Source, use a spare Miniature Light Source.
1.
Rotate the Battery Holder Cap counterclockwise and remove it (see Figure
3.6).
2.
Remove the battery from the Miniature Light Source.
3.
Prepare a new battery. Insert it into the Battery Holder. Insert the (+)
terminal first (see Figure 3.7).
4.
Attach the Battery Holder Cap and rotate it clockwise until it stops.
Notch