Olympus ENF-V3, Инструкция по эксплуатации, Страница: 50 / 60

46
5.4 Returning the endoscope for repair
ENF-V3 OPERATION MANUAL
Ch.5

Withdrawal when all endoscopic images do not appear on
the monitor or a frozen image cannot be restored
WARNING
Thoroughly reprocess the endoscope before returning it for repair. Improperly
reprocessed equipment poses an infection control risk to each person who handles
the endoscope within the healthcare facility and at Olympus.
CAUTION
Olympus is not liable for any injury or damage that occurs as a result of repairs
attempted by non-Olympus personnel.
Before returning the endoscope for repair, contact Olympus. With the endoscope, include a description
of the malfunction or damage and the name and telephone number of the individual at your location
who is most familiar with the problem. Also include a repair purchase order. When returning the
endoscope for repair, follow the instructions given in “
 Transporting outside the healthcare facility” on
page 42.
3
Follow the procedure of Step 3 above in “

Withdrawal when the WLI and NBI
endoscopic images appear on the monitor”. Carefully withdraw the endoscope under
the visible observation mode when the WLI endoscopic image is not displayed.
1
Turn all equipment OFF except the video system center, light source, and monitor.
2
Turn the video system center and light source OFF and then ON again. If the WLI or
NBI endoscopic image appears or the frozen image is restored, follow the procedure
given in “
 Withdrawal when either the WLI or the NBI endoscopic image does not
appear on the monitor”, beginning from Step 2.
If all endoscopic images still do not appear or the frozen image cannot be restored,
perform the following steps.
3
Turn the video system center, light source, and monitor OFF.
4
Turn the UP/DOWN angulation control lever to its neutral position and release the
angulation control lever.
5
Withdraw the endoscope from the patient carefully.
5.4 Returning the endoscope for repair