99
EN
8
Customizing your camera
A
You can switch the functions of the
AEL
/
AFL
button and the
<
button. When you select
[ON]
, the
AEL
/
AFL
button will function as the
<
button, and the
<
button will function as
the
AEL
/
AFL
button.
• The setting also applies to the
<
button on the optional power battery holder when
attached to the camera.
n
FUNCTION
You can set the function of the arrow pad.
[OFF]
To prevent malfunction, the functions assigned to the arrow pad will not be
activated when the button is pressed.
[ON]
The functions assigned to the arrow pad will be activated.
[
P
]
You can use the arrow pad to select the position of the AF target. Selection is
possible for a short time after the shutter button is pressed halfway and released.
g
“Selecting the AF target mode and position” (P. 58)
j
FUNCTION
Other functions can be assigned to the
j
/
Y
/
<
button.
[
j
/
<
/
Y
]
g
“Sequential shooting” (P. 61), “Self-timer shooting” (P. 62), “Remote control
shooting” (P. 62)
[AF AREA]
g
“AF target selection” (P. 57)
[AF MODE]
g
“AF mode selection” (P. 55)
[WB]
g
“Selecting the white balance” (P. 68)
[METERING]
g
“Changing the metering mode” (P. 48)
[ISO]
g
“ISO sensitivity setting” (P. 52)
T
RELEASE/
j
RLS PRIORITY S/RLS PRIORITY C
Normally, this camera does not release the shutter while the AF is operating or the flash is
charging. If you want to release the shutter without waiting until these operations have
completed, use the setting below. You can set the release priority individually in AF mode.
RLS PRIORITY S
Sets release priority for S-AF mode
g
P. 55.
RLS PRIORITY C
Sets release priority for C-AF mode
g
P. 56.
O
fps
You can set the number of pictures shot in one second when using sequential shooting with
[
O
]
from
[1fps]
to
[3fps]
.
s0023_e_00_0_unified.book Page 99 Monday, February 2, 2009 5:18 PM
