19
EN
Basic operat
ions
Basic guide
Basic operations
There are three ways to operate this camera.
Using the direct buttons to operate the
camera
g
P. 20
You can make the function settings with the
control dial and the direct buttons assigned to a
function. Setting information is displayed in the
viewfinder and on the super control panel while
you are setting a function. This is useful for
operating the camera while composing the
subject in the viewfinder.
Descriptions in this manual
The operating instructions of the direct buttons, super control panel and menu are
described as follows in this manual.
• “
+
” indicates operations performed at the same time.
• “
” indicates you should proceed to the next step.
e.g.: When setting the flash intensity control
Direct button
#
+
F
j
Super control panel
i
p
: [
w
]
Menu
MENU
[
X
]
[
w
]
Resetting the camera
settings
In
P
,
A
,
S
, and
M
mode, current camera
settings (including any changes you have
made) are retained when the power is turned
off. To reset the camera to the factory default
settings, set
[RESET]
.
g
“Resetting the camera settings” (P. 94)
j
Control dial
Setting on the menu
g
P. 22
You can use the menu to set shooting and
playback settings and customize camera
functions.
Setting while looking at the super control
panel
g
P. 21
You can make the function settings with the
super control panel on the LCD monitor. You can
use the super control panel to view the current
settings and directly change the settings.
s0023_e_00_0_unified.book Page 19 Monday, February 2, 2009 5:18 PM
