1
Attaching the stand clip (
CL4)
24
EN
The voice recorder can be attached with a clip to the inside of a pocket of your clothes to
prevent it from dropping when you take it out with you. You can also use the clip as a stand
when you place the voice recorder on a table for recording.
Attaching the stand clip (CL4)
1
Align the protrusion on the back
of the clip with the locating hole
at the back of the voice recorder.
Locating
hole
2
Turn the screw of the clip with
your fingers to fix the clip to the
voice recorder.
Loosen
Tighten
NOTE
•
Do not strongly tighten when attaching
the clip to the voice recorder. Damage
may result.
•
Do not attach other than a dedicated
attachment. The voice recorder may be
damaged.
•
The clip is for thin material such as
the pocket of clothing. Be sure to do
the following when using the clip
because incorrect use may result in
the clip being damaged or the voice
recorder being damaged as a result of
it dropping.
•
When using the clip, insert the voice
recorder inside a pocket or alike and
secure it with the clip.
•
Do not attach the clip to hard
material.
•
Do not use the clip by forcing it open.
•
Securely attach the clip all the way
onto the material.
•
Do not apply excessive force while
the clip is being used.
•
A mark may remain on the material
after the clip is used. Try using the clip
in advance in an unnoticeable part of
the material.
•
Remove a dedicated attachment before
opening the battery/card cover.
