Olympus BX-RFA, Инструкция по эксплуатации

Страница: 39 / 52

35
Fig. 16
7
Setting the Power Supply Unit
(Figs. 16 & 17)
! Cables and cords cam easily be damaged when bent or twisted. Do
not subject them to excessive force.
! Make sure that the main switch is set to “ ” (OFF) before connect-
ing the power cord.
! Always use the power cord provided by Olympus. If no power cord
is provided, please select the proper power cord by referring to
“PROPER SELECTION OF THE POWER SUPPLY CORD” at the end of
this instruction manual.
1. Verify that the voltage and frequency of the input power supply match the
requirements inscribed on the rating plate @.
(100 V systems can be used with voltages in the 100 to 120 V range and
200 V systems can be used with voltage in the 220 to 240 V range, both
with frequencies of 50 to 60 Hz.
2. Securely plug the burner socket connection cord into the power supply
unit’s connector ².
3. Plug the power supply unit’s power cord into its power input connector
³, then plug the power plug | into the wall power outlet ƒ.
! Be sure to supply power from a grounded 3-conductor power outlet
using the proper power cord. If the power outlet is not grounded
properly, Olympus can no longer warrant the electrical safety perfor-
mance of the equipment.
Fig. 17
@
²
³
| ƒ