Olympus BX-RFA, Инструкция по эксплуатации

Страница: 34 / 52

30
The diagram below shows the sequence of assembly of the various modules. The numbers indicate the order of assembly.
The module numbers shown in the following diagram are merely the typical examples. For the modules with which the
module numbers are not given, please consult your Olympus representative or the catalogues.
# When assembling the microscope, make sure that all parts are free of dust and dirt, and avoid scratching any parts
or touching glass surfaces.
Assembly steps enclosed in will be detailed on the subsequent pages.
}All assembly operations are possible by using the Allen screwdriver ( ) provided with the microscope.
The Allen wrench ( ) provided with the illuminator is used only for clamping the screws inside the illuminator. (To retain
the performance, have your Olympus representative conduct this work.)
ASSEMBLY
9-1 Assembly Diagram
NOTES
· Parts marked with # can be attached only to the BX-URA2 universal illuminator.
· Be sure to insert the sliders in the orientations shown in the diagram. Otherwise, they cannot be fitted in click
positions and engaged correctly in the light path.
Eyepiece
Observation
tube
Exciter balancer
U-EXBABG
U-EXBAUB
U-EXBAUG
ND filters
U-25ND6-2
U-25ND25-2
U-25ND50-2
Vertical
illuminator
BX-URA2
BX-RFA
Turret
UV cut plate
Fluorescence
mirror unit
Objectives/Revolving
nosepiece
Light shield sheets
Mercury burner
USH-103OL
HBO103W/2
Mercury lamp
housing
U-LH100HG
U-LH100HGAPO
Lamp housing
clamping screw
Illuminator
clamping
screws
Power supply unit
(for 100W mercury burner)
Power cord
Rectangle field stop
BX-RFSS
Polarizer
U-PO3
6-Position barrier filter slider
U-RSL6EM
Analyzer
U-AN
U-AN360-3
Microscope frame
BX51TRF
6-Position filter slider
U-RSL6
6-Position filter slider
U-RSL6