Olympus BondMaster 600 Скачать руководство пользователя страница 218 | Manualshive

Страница: 218 / 248

Olympus BondMaster 600 Скачать руководство пользователя страница 218

DMTA-10045-01EN, Rev. E, August 2016

Chapter 8

208

Disposing of Batteries

Batteries must be properly discarded in compliance with local regulations (see
“Important Information — Please Read Before Use” on page 5).

8.2

Probe Care and Diagnostics

BondMaster 600 probes are reliable and durable as long as they are carefully handled:

•

Do not drop the probes on hard surfaces.

•

Do not hit the probes with any objects.

•

Resonance probes should always be used with Teflon tape on the inspection
surface. In addition to prolonging the life of the probe, this measure also makes
the probe easier to use.

•

Pitch-catch probes should have their active and stabilizing probe tips inspected
and replaced very frequently; especially probes with removable active probe tips.

«
...
216
217
218
219
220
...
»

Содержание BondMaster 600

























































































































































































































































Отзывы:

Нет отзывов