Olympus BondMaster 600, Руководство пользователя

Страница: 21 / 248

DMTA-10045-01EN, Rev. E, August 2016
Important Information — Please Read Before Use 11
• Do not expose a battery to moisture or rain; doing so could cause an electric
shock.
• Only use the BondMaster 600 instrument or an external charger approved by
Olympus to charge the batteries.
• Only use batteries supplied by Olympus.
• Do not store batteries that have less than 40 % remaining charge. Recharge
batteries to between 40 % and 80 % capacity before storing them.
• During storage, keep the battery charge between 40 % and 80 %.
• Do not leave batteries in the BondMaster 600 during instrument storage.
Hearing Protection
The BondMaster 600 probes emit audible sounds that easily propagate and that are
amplified by the part being tested. The sound level is dependent on numerous factors,
including (but not limited to) part composition, frequency, extent of defect(s), and
proximity to the part being tested. Under specific test conditions, sound levels in
excess of 85 dB have been measured near the probe. Sounds of this intensity can result
in hearing fatigue and possible hearing damage after long-term exposure, and
therefore a hearing-protection program may be necessary. In particular, the
mechanical impedance analysis (MIA) and pitch-catch swept modes are capable of
generating high-pitched sounds that can cause earlier onset of hearing fatigue.
Because of the variations in part composition, test conditions, and part proximity,
OSSA (Olympus Scientific Solutions Americas) recommends that you evaluate your
particular test applications to determine if hearing protection is required.
Equipment Disposal
Before disposing of the BondMaster 600, check your local laws, rules, and regulations,
and follow them accordingly.
CAUTION