Olympus 8080 - CAMEDIA C Wide Zoom Digital Camera Скачать руководство пользователя страница 87

Страница: 87 / 263

AE Lock - Locking the exposure

Advan

ced shoot

TIPS

To save the locked multi-metering exposure after shooting (AE memory)

→

After setting AE lock in Step 1, or after pressing the shutter button halfway
in Step 2, hold down the AEL button for more than 1 second.

appears.

While

is displayed, the exposure is saved. Press the AEL button again

to cancel the AE memory.

AE lock was canceled.

→

Do not operate any of the buttons or the mode dial after performing AE lock.
Doing so will cancel AE lock.

→

The camera had emerged from sleep mode or the power was turned off.

• AE lock is not available when multi-metering is enabled. Set the metering

method to ESP,

“Metering” (P.81)

• AE lock is not available when a menu is displayed on the screen.

“Menu basics” (P.38)

• AE lock is not available when the control panel is displayed on the screen.

“CONTROL PANEL – Using the monitor as a control panel” (P.163)

Note

Содержание 8080 - CAMEDIA C Wide Zoom Digital Camera








































































































































































































































































Результаты поиска

Содержание 8080 - CAMEDIA C Wide Zoom Digital Camera

Отзывы:

Olympus 8080 - CAMEDIA C Wide Zoom Digital Camera, Справочное руководство, Страница: 87 / 263

Результаты поиска

Содержание 8080 - CAMEDIA C Wide Zoom Digital Camera

Отзывы: