134
7
Pl
ayback
Playback on TV
Use the AV cable provided with the camera to play back recorded images on
your TV. Both still pictures and movies can be played back.
1
Make sure that the TV and camera are turned off. Connect the A/V
OUT jack on the camera to the video input terminal on the TV
using the AV cable.
2
Turn the TV on and set it to the video input mode.
• For details of switching to video input, refer to your TV’s instruction manual.
3
Set the mode dial to
q
and turn the camera on.
• The last picture taken is displayed on the TV. Use the arrow pad to select the
picture you want to display.
• The close-up playback, index display, slideshow and other playback functions
can also be used on a TV screen.
TIPS
• You are recommended to use the optional AC adapter when using the
camera with a TV.
• Make sure that the camera’s video output signal type is the same as the TV’s
video signal type.
g
“VIDEO OUT – Setting the video signal type” (P.174)
• The camera’s monitor and viewfinder turn off automatically when the AV
cable is connected to the camera.
• Be sure to use the AV cable provided to connect the camera to the TV.
• The picture may appear off-center on the TV screen.
• When pictures are compressed in order to fit the entire picture on the TV
screen, a black frame may appear around the picture. If the picture is output
to a video printer via the TV, the black frame may be printed.
Mode dial
Connect to the TV’s video input
(yellow) and audio input (white)
terminals.
AV cable
A/V OUT jack (MONO)
Connector cover
Note