manualshive.com logo in svg

Olympia Millennium-E, Руководство пользователя, Страница: 56 / 235

Поделиться
Скачать
Olympia Millennium-E Скачать руководство пользователя страница 56

The Ultimate Ice Resurfacer

48

Manual Ice Making Water Flow

The manual water function allows water to be applied to the ice at a constant rate, regardless 
of the speed at which the ice resurfacer is travelling. It can also be used to supplement the 
speed related water.

5.8  Controls for the Hydraulic System

Switching the Hydraulic Pump Motor On and Off

There are two ways of switching on the hydraulic pump motor:

1. 

By pressing the accelerator pedal.

2. 

By pressing the appropriate function switch.

However, the ice resurfacer must be turned on at the ignition switch before the motor can be 
started up.

The hydraulic pump motor is switched off either by turning off the ignition switch, or 

automatically approx. 20 seconds after the accelerator pedal was last pressed, or as soon as 
you let go of a function switch.

Содержание Millennium-E












































































































































































































































Отзывы:

Нет отзывов