manualshive.com logo in svg

Olympia Millennium-E, Руководство пользователя, Страница: 44 / 235

Поделиться
Скачать
Olympia Millennium-E Скачать руководство пользователя страница 44

The Ultimate Ice Resurfacer

36

The bottom control panel has been configured that the top row of switches is on ice and in a 
specific order to maintain the proper sequence of engagement. From Left to right. 

Item 7   

 

Conditioner Up/Down

Raises and lowers the conditioner

To raise the conditioner, push and hold the switch UP until the 
conditioner is in the full up position.

To lower the conditioner, push and hold the switch DOWN until the 
conditioner is in the full down position.

Item 8   

 

Elevator Off/On

Turn both augers ON (horizontal and vertical auger), by pushing the 
switch down. Turn both augers OFF by lifting the switch to the off 

position. 

If the ice resurfacer is switched off, with the ignition key or with the EMERGENCY SHUT OFF 
switch, the augers must be restarted again. 

Содержание Millennium-E












































































































































































































































Отзывы:

Нет отзывов