manualshive.com logo in svg

Olympia Millennium-E, Руководство пользователя, Страница: 24 / 235

Поделиться
Скачать
Olympia Millennium-E Скачать руководство пользователя страница 24

The Ultimate Ice Resurfacer

16

1.12  Remaining Hazards

Risk of Injury!

The ice resurfacer operator must be in possession of all his mental and physical faculties to 
ensure that nobody gets run over (i.e. he must not have consumed alcohol, taken pills or 
other medication, or taken drugs).

Risk of Falling and Risk of Injury!

The carrying of passengers on the ice resurfacer is strictly prohibited, as they could fall off 
the machine and sustain injury.

Risk of Injury!

Before starting any maintenance job, make sure that you secure the snow dump tank with 
the safety supports  to prevent it from dropping down, because there is a considerable 
hazard potential here. 

Risk of Injury!

Always place blocks under the conditioner when performing maintenance work and blade 
changes.

Risk of Sustaining Cutting Injuries!

Always wear protective gloves when handling the blade. Because the blade is extremely 
sharp, for your own safety and to protect the sharp edge of the blade, always use the 
magnetic guard. 

NEVER leave the OLYMPIA unattended when filling it with water, because hot water could 
leak out and injure someone.

 

Содержание Millennium-E












































































































































































































































Отзывы:

Нет отзывов