Olympia Millennium-E Скачать руководство пользователя страница 23

Страница: 23 / 235

The Ultimate Ice Resurfacer

After completing the maintenance jobs and before switching on the ice resurfacer, make sure that:

• There is nobody in the danger zone.

• There are no more tools or other parts in the vehicle.

•

All safety devices/guards have been duly re-installed and are in proper working order.

•

Adhere to the safety regulations that are specified in the descriptions of the individual

maintenance jobs.

1.11 Waste Disposal

Hazardous waste must not be disposed of with general household waste. Each local community

generally has drop-off locations for the proper disposal of hazardous waste.

The battery must be disposed of in the proper manner. Contact your battery supplier for proper
disposal of your batteries. (refer to the regulations in your O.S.H.A. manual or Directive
91/157/EEC or to your local battery disposal regulations).

For more information, please contact your local waste disposal authorities.

Содержание Millennium-E












































































































































































































































Результаты поиска

Содержание Millennium-E

Отзывы:

Olympia Millennium-E, Руководство пользователя, Страница: 23 / 235

Результаты поиска

Содержание Millennium-E

Отзывы: