manualshive.com logo in svg

Olympia Millennium-E, Руководство пользователя, Страница: 25 / 235

Поделиться
Скачать
Olympia Millennium-E Скачать руководство пользователя страница 25

The Ultimate Ice Resurfacer

17

Risk of Injury!

Make sure that there are no people or objects in the work and driving area. 

Danger!

Do not spray the machine with a water hose to clean it, because this can lead to electrical 
faults.  

Risk of Explosion!

Ensure proper ventilation during the charging process. Escaping hydrogen gas could lead to 
an explosion.

Risk of Short Circuiting!

The batteries must not come into contact with water. Never place anything on top of the 
batteries, otherwise short-circuiting could occur.

Risk of Injury!

If your ice resurfacer is parked on an incline, before releasing the handbrake turn the start 
key to the ON position. Make sure the gear selector is in neutral. Depress and release the 
accelerator pedal. Now you can depress the brake pedal, release the handbrake and the ice 
resurfacer will not move.

Failure to follow this procedure will result in the ice resurfacer rolling down the incline 
when the handbrake is released.

Содержание Millennium-E












































































































































































































































Отзывы:

Нет отзывов