manualshive.com logo in svg

Olympia Millennium-E, Руководство пользователя, Страница: 46 / 235

Поделиться
Скачать
Olympia Millennium-E Скачать руководство пользователя страница 46

The Ultimate Ice Resurfacer

38

Item 12  

 

Snow Bin Up/Down

Opens and closes the snow dump tank. 

To open the snow dump, lift and hold the switch up until the snow 
dump tank is fully open.

Before opening the snow dump tank make sure there is sufficient 
clearance as the snow dump tank will move forward and up.

To close the snow dump tank hold down the down switch until the snow 
dump tank is completely closed.

Before closing the snow dump tank make absolutely sure that there 
are no obstructions of any type that could get crushed between the 
tank and the chassis of the ice resurfacer. 

It is recommended that if possible the snow dump tank should be left 
fully open after each ice cleaning operation, with the safety bars down 
and locked, so that any residual snow or water can drain from the tank.

Item 13  

 

Tire Wash

Push the button in and hold to activate the tire washing system.

Let the button out to deactivate the tire washing system. 

Содержание Millennium-E












































































































































































































































Отзывы:

Нет отзывов