Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 14
Parts
6B - Single Window Wall
Rear Panel
(
45”w
x 74 1/2”)
x 1
Hardware
S2 - 1 1/4” Screws
x 6 total
22.
Locate a second single window wall panel
(45” wide).
Position in opposite rear corner. Slide
edge tight in corner against side wall plywood
backing. Adjust panel so window openings match.
Secure with 6 - 1 1/4” screws.
23.
Once panel is correctly position on
wall framing, secure with 6 - 1 1/4” screws.
Pre-drill siding
with 1/8” drill bit.
