1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 21
38.
Locate all 3 door trim pieces. Starting with the
92 1/2” long angle cut top trim, position over stop and
wall seam. Attach with 8 - 1 1/2” nails.
Hardware
N1 - 1 1/2” Finishing Nails
x 8 total
Parts
4C - Vertical Door Trim - Jamb
(1/4” x 2” x 92 1/2” - 22.5 deg. one end)
x 1
5C - Top Horizontal Door Trim with Filler
(3/4” x 2” x 33 5/8”)
x 1
6C - Vertical Door Trim- Narrow Wall
(1/4” x 2” x 72)
x 1
36.
Locate all 3 door stops. Start
on the door jamb side, position 2”
wide stop against door jamb and
the edge of wall siding. Attach with
4 - 1 1/4” screws.
37.
Position and attach the narrow
wall door stop on wall framing with
6 - 1 1/2” nails. To complete door
stops, attach the horizontal stop
against door header and attach with
3 - 1 1/4” screws.
C. Trim Section
Parts
1C - Vertical Door Stop- Jamb
(7/8” x 2” x 72 1/2”)
x 1
2C - Vertical Door Stop- Narrow Wall
(7/8” x 1/2” x 72 1/2”)
x 1
3C - Top Horizontal Door Stop-
(3/4” x 2” x 33 5/8”)
x 1
Hardware
S2 - 1 1/4” Screws
x 4 total
Hardware
N1 - 1 1/2” Finishing Nails
x 6 total
S2 - 1 1/4” Screws
x 3 total
1/2” thick
7/8” wide
