Alternate Door Configuration
(Door on Left or Right of Center)
To configure the Cabana so the Door
is positioned on the left or right of
center wall panel, follow the general
directions in this manual for a regular
door configuration and note the
following changes.
Door Stops
A
.
Follow sequential
Steps 9 - 17
in the
Wall Section for regular configuration to
position and secure wall panels.
For Door on left side, align and attach two
Window Wall Panels in center and right
positions. For Door on right side, configure
Window Walls on opposite side.
B
.
With walls positioned and attached together, locate Door Jamb and orientate on Side Wall Panel
stud. Align Door Jamb so Flush with bottom wall plate of wall framing. Wall siding will overhang 1/2”
on outside. Door Jamb will overhang the floor on the doorway side by 1”.
C
.
When correctly aligned, attach Door
Jamb to wall stud with
4 - 2 1/2” Screws
.
D.
Attach 1 Vertical and Horizontal Door Stop.
See
Step 73
for detail. You may have to trim
Horizontal Door Stop to fit.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 40
