38.
Locate 2
Outside Roof Battens
and 1
Inside Roof Batten,
place on Roof Rafters. Place at top of Rafter section where Rafters
and Ridge boards meet. Battens should be positioned evenly on 3rd
and 5th Rafters. Battens will overhang outside Rafter by 3 3/4”.
Parts (Step 38 - 44)
Roof Battens Outside
(3/4” x 3 1/2” x 39”)
x 16
Roof Battens Inside
(3/4” x 3 1/2” x 35)
x 8
Batten Spacer
(3/4” x 1 1/2” x 17 1/8”)
x 12
Hardware (Steps 38 - 44)
S2
- 1 1/4” Screws
92 x total
3 3/4”
Flush to Ridge Board
39.
Attach each
Batten
to Rafters with
3 - 1 1/4” screws
per Batten.
Important:
pre-drill pilot
holes with 1/8” drill bit first to prevent splitting.
40.
Place
Batten Spacer
flush with first set of Battens on outside Rafter. Batten Spacer allows
you to line up next row of Battens. Attach each with
Batten Spacer
with
2 - 1 1/4” screws
.
Outside
Roof Batten
Outside
Roof Batten
Inside
Roof Batten
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 22