Thick butt of siding
Caulk
gap.
Caulk
gap.
Window
frame.
Siding Butt
Screw insert into
bottom (thick)
part of siding.
82.
To reduce possible water from penetrating
into the window cavity, caulk gap on both sides
of window opening prior to installing
Window
Insert.
Position insert in cavity and screw with
6 - 1 1/4” Screws
. On sides, make sure to
screw insert into the thick butt of the siding only.
Parts (Step 82)
Window Insert x 3
Hardware (Step 82)
S2
- 1 1/4” Screws
x 36 total
83.
Once Insert is attached,
caulk the “triangular gap”
between the Insert’s outside
flange and the siding. Also put
a bead of caulking horizontally
at top of window where the
flange and siding meet. This
additional caulking will also will
reduce the chances of moisture
entering into your shed.
81.
Toe-nail
Short Post
to Deck
with
3 - 2 1/2” Screws
. Drill pilot
holes to avoid splitting posts.
Note:
Ensure the screws are low
enough on the post to be covered by
Post Base Trim in
Step 97
.
PreDrill!
Hardware (Steps 81)
S1
- 2 1/2” Screws
x 3 total
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 44
