Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 29
51.
Identify all Roof Panels. Locate one
Large Plywood Roof
Panel
. Position on rear side of shed. Recess plywood back 1/8” from
end of rafter. Plywood will overhang rear of shed by 3 3/4”. On oppo-
site side plywood will be centered on 5th rafter, supported by Rafter
Nailing Cleat.
Parts (Step 51- 55)
Roof Panel Large
(5/8” x 48” x 72”)
x 4
Roof Panel Small
(5/8” x 8 5/8” x 72”)
x 4
3 3/4” overhang
Recessed 1/8” and
centered on 5th rafter
52.
With Roof Plywood correctly positioned on rafters, attach with
12 - 1 1/4” screws
. On 5th rafter, be sure to angle screw to hit the
meat of the rafter.
Hardware (Step 52)
S2
- 1 1/4” Screws
x 12 total
53.
Locate one
Small Plywood Roof Panel
and postion above
the previous piece. Postion tight against Large Roof Panel and
attach with
8 - 1 1/4” screws
.
Hardware (Step 53)
S2
- 1 1/4” Screws
x 8 total
