Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 5
4.
Position end of joist equally on one side of the
Core Block. Angle screw with 3 - 3” screws from
the top and sides. Joist and top of Core Block
should sit flush with each other.
Note,
Drill 1/8” pilot holes in joist prior to screwing
to prevent splitting.
5.
Lay completed Core Block / Joist Assembly on
flat level surface.
6.
Position and angle screw the
second joist assembly to opposite
side of Core Block.
7.
Continue to add Joist Assemblies to
Core Block.
