21
7
Pull the power supply cable and sensor cable through
the recesses in the metal cover into the wood stor-
age compartment.
Power supply cable Sensor cable
8
Plug in all connecting cables between the door con-
tact switch, electronics and servo motor.
7 8 9 10
7 ...Power connection 24V
8 ...Servo motor
9 ...Door contact switch
10 ...Temperature sensor
9
Push the servo motor onto the rotation axis of the air
regulator lever.
First, align the rotation axis with the air regulator le-
ver so that the servo motor can be pushed on and
simultaneously snaps into place in the motor retain-
ing clip.
Servo motor Motor retaining clip
10
Screw on the electronics with the console behind
the combustion chamber door on the right side.
Note:
When routing the cables, ensure that they are not dam-
aged by moving parts (e.g. door of wood storage com-
partment, drawer under the door of the combustion
chamber) or pulled out of the plug contacts.
Note for Pacaya:
Do not lay any cables under the unit as the convection
air slide valve is located underneath the unit as a mov-
ing part and may damage the cables when actuated.
