Olivetti Jet-Lab 400, Инструкция по эксплуатации

Страница: 12 / 49

4
T
O CONNECT THE TELEPHONE HANDSET
1. Place the fax machine on its right side, insert the connector of the
handset cable into the socket marked with the symbol on the
fax machine and fix the cable into its groove.
2. Return the fax machine to its normal position and place the hand-
set in its seat.
T
O CONNECT IT TO THE POWER SUPPLY
1. Insert the female connector at one end of the power cable into the
male connector on the rear of the fax machine.
2. Then insert the plug at the other end of the cable into the wall
power socket.
The fax machine automatically runs a short test to check that its com-
ponents are working and then the display shows:
AUTOMATIC RX
CHECK PRINT HEAD
NOTE
The fax machine will remain permanently connected ,
ready to receive and send documents 24 hours a day.
If you want to turn it off , detach the plug of the power
cable from the wall socket as the fax machine has no on/off
switch.
notE
If the messages do not appear in the language spoken in
your country, choose the "
LANGUAGE " from those avail-
able by pressing the following keys in the order indicated:
until the display shows "INSTALLATION",
, until it shows "LANGUAGE", ,
|
/
}
until you
have selected the desired language, and, finally .
T
O ADD PAPER
1. Open the cover of the ASF by inserting your finger in the notch
situated on the right side of it.
2. Pull out the paper support completely and then turn it to a vertical
position, as shown in the figure.
3 Holding the sheets by their upper edge, insert them by letting them
"drop" into the ASF without folding or forcing them.
4. Push the sheets against the left side of the ASF using the adjusting
lever.
notE
If you add sheets to the ASF, make sure you place them
under and not on top of those already present.
notE
The fax machine has a memory that enables it to receive up
to 28 pages even if you do not add any paper .