3 6
3.
Press the key
until the display shows:
TOLL SAVER
4.
To confirm the setting, press the key:
The display shows:
ON
5.
To view the other available option: "OFF", press the
keys:
|
/
}
6.
To confirm your choice, press the key:
7.
To return the fax machine to the initial stand-by mode,
press the key:
O
UTGOING
MESSAGE
ONLY
Using this function, whenever an incoming call is re-
ceived, the TAD plays the OGM 1 but does not record
any incoming messages.
You can use this function when you expect to be away
for a long time and it would not be possible to record all
messages received in your absence.
In this case, in place of the ordinary outgoing message,
it is advisable to record a different one, for example:
"From 22nd June to 19th September only faxes will be
accepted. No incoming messages will be recorded".
1.
Press the key
until the display shows:
TAD SET-UP
2.
To confirm the setting, press the key:
The display shows:
ICM ON SPEAKER
3.
Press the key
until the display shows:
ANNOUNCE ONLY
4.
To confirm the setting, press the key:
The display shows:
ANNOUNC.ONLY:OFF
5.
To view the other available option: "ANNOUNC.
ONLY:ON", press the keys:
|
/
}
6.
To confirm your choice, press the key:
The display shows:
LIFT HANDSET
If you have already recorded OGM 1, the display will
show the message "PLAYING" and the TAD will play it
back.
If you have not recorded it, the display will show the
message "NOT RECORDED".
7.
To change the outgoing message recorded previously
or to record a new one.
The display shows:
<|> TO RECORD
8.
To start recording, press the key:
The display shows:
RECORDING 20
S
ILENT
RECEPTION
OF
INCOMING
MESSAGES
Using this function you can receive messages confi-
dentially. In other words, the TAD receives messages
without playing them over the speaker so that any other
persons present cannot hear your messages.
1.
Press the key
until the display shows:
TAD SET-UP
2.
To confirm the setting, press the key:
The display shows:
ICM ON SPEAKER
3.
To confirm the setting, press the key:
The display shows:
ICM SPEAKER:OFF
4.
To view the other available option: "ICM SPEAKER:ON",
press the keys:
|
/
}
5.
To confirm your choice, press the key:
6.
To return the fax machine to the initial stand-by mode,
press the key:
T
O
THE
TAD
CONFIGURATION
PARAMETERS
1.
Press the key
until the display shows:
TAD SET-UP
2.
To confirm the setting, press the key:
The display shows:
ICM ON SPEAKER
3.
Press the key
until the display shows:
PRINT TAD SET-UP
4.
To confirm the setting, press the key:
The display shows:
PRINT OUT: <|>
Содержание Fax-Lab 115
