Olivetti ECR 8100, Руководство пользователя

Страница: 20 / 70

10
7. Enter the number of items [0 to 9999] and press
.
NOTE: If 0 is entered, stock control is not
activated.
8. Press to enter the PLU Status Definition mode.
9. Type the PLU number from and press or scan
the item's barcode.
10. Type the [Price Status] , [Tax Status] and the
[Take-out Tax Status] , 5-digit code referring to the
previous table.
11. Press followed by to exit.
12. Press to enter PLU-Department link definition
mode.
13. Type the PLU number that you are currently
programming and press or, again, scan the
item's barcode.
14. Type the department number [1 to 99] that you
want to link the PLU to. If tax is payable for a
particular PLU item, be sure to link the PLU number
related to the item to a department that is
programmed for tax. To program a department for
tax, refer to the section "Programming the
Departments".
15. Press followed by to exit.
Modifying Stock Quantity
1. Control lock key position: PRG .
2. Press to enter Stock Quantity Definition
mode.
3. Type the PLU number (max. 14 digits) and press
, or scan the item's barcode.
4. Enter the number of items to be added or
subtracted from the current quantity, from
[1 to 9999] .
5. If the number specified is to be added to the current
stock quantity, press , otherwise press
to subtract.
6. Press to exit.
NOTE: Press to clear the input data.
Example: Create PLU 2 with a unit price of £2.69, 1000
items in stock, status 2 01 00 and linked to Department 3.
Type/Press:
After you have programmed your PLU items, you can
print a report that indicates the programming values.
See section "PLU Programming Report" for details.
C
ASH
R
EGISTER
P
ROGRAMMING AND
F
EATURES
Programs and transaction information for management
reports are stored in the memory of the cash register
which is protected by back-up batteries.
Before beginning to program the cash register or
to perform sales transactions, insert the batteries
to save this information if a power failure occurs
or if you unplug the cash register from the
electrical outlet
.
Changing How the Cash Register is
Programmed
If you wish to make a change to your initial
programming (such as an update to VAT rates, PLUs or
exchange rates):
•
Turn the control lock key to the PRG position.
•
Re-do the program in question and confirm as
explained in the next sections.
•
Turn the control lock key to another operating mode.
A new program entry will automatically overwrite a
previous entry for the same program.
U
SING THE
C
ASH
R
EGISTER IN A
P
ASSWORD
P
ROTECTED
M
ODE
If a manager password was defined to protect
unauthorized access to the PRG, Z and X modes,
proceed as follows to enter the specific password:
1. Control lock key position: PRG .
2. Type the specific 4-digit password.
3. Press .