Olivetti d-COLOR MF652, Руководство по устранению неисправностей

Страница: 80 / 121

Cannot copy 9
9-4 d-Color MF 752/652
9.1
Images are tipped. Is the original positioned correct-
ly? Correctly position the original
against the
Original Scale .
Load the original into the ADF ,
and slide the adjustable Lateral
Guide to fit the size of the origi-
nal.
Is the original incorrectly posi-
tioned in the
ADF ?
If the original cannot be fed cor-
rectly through the
ADF , make
copies by positioning the original
on the
Original Glass .
Is the Slit Scan Glass dirty?
(When the ADF is in use)
Clean the Slit Scan Glass .
Is the lateral guide of the paper
tray correctly aligned with the
paper? Align the
Lateral Guide
with the
edges of the paper.
Has curled paper been loaded
into the paper tray? Manually flatten the paper and
re-load it into the paper tray.
An output copy is curled. Curls may appear depending on
the paper type (recycled paper,
for example). Remove the paper from the pa-
per tray, turn it over, and then
load it again.
Replace with new dry paper.
The area around an image gets
smudged. Is the
Original Pad
dirty? Clean the
Original Pad
with a
soft cloth dampened with a mild
detergent.
Is the paper selected of a size
larger than the original size?
(When copying at full size or
100.0% zoom ratio) Select a paper size that is the
same size as the original.
Otherwise, tap [Zoom] on the
copy main screen to select [Au-
to], and perform enlarged copy-
ing at a zoom ratio matching the
paper.
Is the size or orientation of the
original different from that of the
paper?
(When copying at full size or
100.0% zoom ratio) Select a paper size as large as
the original.
Otherwise, re-load paper in the
same orientation as the original.
Have you selected the zoom ra-
tio for reduced copying that is
suited for the paper size?
(When the reduced copying
zoom ratio has been selected
manually) Select the zoom ratio that
matches the paper size.
Otherwise, tap [Zoom] on the
copy main screen to select [Au-
to], and perform reduced copy-
ing at a zoom ratio matching the
paper.
Cannot switch to the 2-Sided >
1-Sided or 2-Sided > 2-Sided
function. Have settings been selected that
cannot be combined? Check the combinations of the
selected settings.
On a device with account track
enabled, copying would not
start even after entering the
password. Did the message [The counter for
the account has reached its
maximum allowance.] appear? Contact your administrator.
The staple position deviates by
90 degrees. Has the staple position been cor-
rectly specified? Specify the staple position cor-
rectly. For information on how to
configure the staple settings, re-
fer to [User's Guide: Copy Oper-
ations].
Description of problem Check points Remedy