Olivetti d-COLOR MF652, Руководство по устранению неисправностей

Страница: 79 / 121

d-Color MF 752/652 9-3
9.1 Cannot copy 9
9 Cannot Copy
9.1 Cannot copy
Description of problem Check points Remedy
Copying does not start. Are the doors of the machine se-
curely closed? Close the doors of the machine
securely.
Has paper of the correct size for
the original been loaded into the
paper tray? Load paper of the appropriate
size into the paper tray.
The original does not feed. Is the ADF slightly open? Securely close the ADF .
Is the original one that does not
meet the specifications? Check that the original is one
that can be loaded into the
ADF
.
Has the original been positioned
correctly? Position the original correctly.
The image is light. Is [Light] specified for the density
setting? Tap [Density] on the copy main
screen to adjust density.
Is the paper damp? Replace with new/dry paper.
The image is dark. Is [Dark] specified for the density
setting? Tap [Density] on the copy main
screen to adjust density.
Was the original not pressed
close enough against the
Origi-
nal Glass ?
Position the original so that it is
pressed closely against the
Original Glass .
The image is partially obscured
or blurry. Is the paper damp? Replace with new/dry paper.
Was the original not pressed
close enough against the
Origi-
nal Glass ?
Position the original so that it is
pressed closely against the
Original Glass .
The entire area of a copy gets
smudged.
Thread-like smudges appear on
a copy. Is the Original Glass dirty? Wipe the Original Glass with a
soft, dry cloth.
Is the
Slit Scan Glass
dirty? Clean the
Slit Scan Glass
.
Is the Original Pad dirty? Clean the Original Pad with a
soft cloth dampened with a mild
detergent.
Is the Electrostatic Charger
Wire dirty?
Clean the Electrostatic Charger
Wire . For information on how to
clean the Electrostatic Charger
Wire , refer to page 3-3.
Was the original printed on highly
translucent material, such as dia-
zo photosensitive paper or OHP
transparencies? Place a blank sheet of paper on
top of the original.
Is a 2-sided original being cop-
ied? If a thin 2-sided original is being
copied, the print on the back side
may be reproduced on the front
side of the copy. In the Back-
ground Removal screen, select a
lighter background density.
For details on the background
removal, refer to [User's Guide:
Copy Operations].