Olivetti d-COLOR MF652, Руководство по устранению неисправностей

Страница: 83 / 121

d-Color MF 752/652 9-7
9.2 Main messages and remedies 9
[Hole-Punch scrap box is full.
Empty hole-punch scrap.] (1) The waste box has become
full of punch hole scraps.
(2) The
Punch Scrap Box is not
loaded.
(1) Dispose of punch hole scrap
stored in the
Punch Scrap Box .
(2) Load the Punch Scrap Box .
[Reset the following number of
originals.]
oo
After removing a paper jam, you
need to restore the original pag-
es ejected from the
ADF .
Re-load the indicated number of
original pages into the
ADF .
[An internal has error occurred.
Open and then close the lower
front door to remedy a problem.
If the trouble code appears
again, contact your Service
Representative.] The machine malfunctioned and
is unable to make copies. Take the appropriate action ac-
cording to the message dis-
played on the screen.
If the problem is not resolved or
released, inform your service
representative of the malfunction
code displayed on the screen.
[An internal has error occurred.
Turn the main switch OFF and
ON. If the trouble code appears
again, contact your Service
Representative.]
[An internal has error occurred.
Please contact your Service
Representative.] The machine malfunctioned and
is unable to make copies. Inform your service representa-
tive of the malfunction code dis-
played on the screen.
[Clean the slit scan glass locat-
ed to the far left of the ADF with
a dry cloth. If you continue to
use the device in its current con-
dition, lines may appear on the
printed output.] The
Slit Scan Glass
is dirty. Clean the
Slit Scan Glass
using
a dry cloth.
[Now Connecting to the
Firmware server.] (1) Your service representative is
performing
CS Remote Care
.
(2) Internet ISW is being down-
loaded.
While the message is displayed,
do not turn the
Power
key OFF.
If the Power key is turned OFF,
turn the Main Power Switch
OFF and contact your service
representative.
[The authentication information
entered is invalid due to failed
access attempts. Contact your
Administrator.] The authentication information
has become invalid since the au-
thentication attempts have failed
the specified number of times. Contact the administrator of the
machine.
[The job log has reached the
maximum allowed. Contact the
System Administrator.] The write area of the job log has
reached the maximum allowed. Obtain job logs via
Web Con-
nection
.
[No Animation Guide available.
Contact your service rep.] Animation guide data is not in-
stalled. For details on installing anima-
tion guide data, contact your
service representative.
Message Cause Remedy