Oliver NC, Руководство пользователя по эксплуатации и инструкции

Страница: 14 / 49

690-NC2
0690S20043 4-3
Running two Automatic Programs at the Same Time
If two programs are compatible they may be run at the same time. They must both be
single stage menus with identical temperatures. While the program is running (Product
1 LED will be lit) enter the second program number (01-40) and hit start. Now both
product LED’s will be lit, the one with the shortest time will have a flashing LED and the
time remaining will be displayed. To briefly display the time of the other product press
the Time key
.
Pre-Alarm
The pre-alarm will go off during the bake as programmed. The alarm will sound and the
display will show (the 1 is for product-1, product-2 pre-alarm displays )
press cancel or open the door to clear the alarm.
For advanced users:
While the pre-alarm is displayed it is possible to add time to it. Do
this by pressing the up key. Press the up key once for each minute. Then wait three
seconds or press the start key. Example: by adding 2 minutes to the pre-alarm, another
pre-alarm will sound in two minutes. It is then possible to add time again and again.
If the alarm is cleared by opening the door it is still possible to add time. However if the
door is then shut and the up key isn’t pressed within three seconds, the pre-alarm will be
cleared and it will not be possible to add time.
Running a manual program
From idle mode press the manual key then press start
CANCEL
START
.
Now enter the desired temperature by using the numeric keypad or the arrow keys to
scroll.
Press the next key to advance. Display will show which prompts you to
enter the time.
Using the numeric keypad enter the time in minutes and seconds.
Example: Run a manual program at 350
°
F for 10 minutes
Display Shows
Press Button(s)...