690-NC2
0690S20043
4-2
Idle Mode
From Idle mode you can:
•
Run an automatic program.
•
Run a manual program.
•
Adjust the temperature.
•
add
steam.
•
open and close the vent.
•
change the fan setting.
Running an Automatic Program
1. From Idle mode
enter the program number (01 - 40) using the keypad
2. Wait 3 seconds or press the start key to begin preheat stage.
3. Wait for oven to reach set temperature. The display will show lo or hi and the menu
number. When the set point is reached the buzzer will sound and the display will
show ready
.
4. Put product into the oven.
5. Close door, bake begins.
6. Pre-Alarm
#1
will sound if programmed, press
CANCEL
START
to cancel the alarm.
For more details see the Pre-Alarm section.
7. Alarm will sound when bake is finished and display will show
. and the
program number
.
Open the door to end the program, this will hold the current bake temperature, add time
if required by pressing the up button.
OR
Press cancel
CANCEL
START
to end the bake and return the holding temperature to 250
°
F.
Содержание NC
