Oliver 6320 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 56

Oliver 6320 Скачать руководство пользователя страница 5

6320 Sander

OLIVERMACHINERY.NET

5

|

Page

Introduction

Thank you for choosing Oliver! This manual contains important information on how to safely set up,
operate, and maintain this machine. Please take the time to read through this manual and make sure you
understand all instructions.

While this manual may provide tips on optimizing the result of your workpiece, the manual is not intended
as  a  substitute  for  formal  woodworking  training.  If  you  need  to  know  how  to  safely  complete  a
woodworking task, please consult knowledgeable and qualified sources before proceeding further.
We  made  every  effort  to  keep  this  manual  up-to-date.  Instructions,  specifications,  drawings,  and
photographs in this manual should match the machine delivered. If you find any differences or anything
that seems confusing in this manual, please check our website for an updated version:

WWW.OLIVERMACHINERY.NET/MANUALS

Alternatively, you can contact our technical support for help:

1-800-559-5065

Before  calling,  please  note  down  the  manufacture  date  and  the
serial number of the machine.  You can find the information on a
nameplate  located  on  the  back  of  the  machine  cabinet.  This
information is needed to provide proper technical support and to
determine if an updated manual is available for your machine.

Please let us know how well this manual serves you. If you have any
suggestions, please call the number above or email us at:

[email protected]

We love to hear from our customers and make improvements.

«
...
3
4
5
6
7
...
»

Содержание 6320

























































Отзывы:

Нет отзывов