Oliver 6320 Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 56

Oliver 6320 Скачать руководство пользователя страница 29

6320 Sander

OLIVERMACHINERY.NET

29

|

Page

Maintenance

Routine maintenance keeps your sander in optimal condition. Please follow the maintenance schedule
below and use the maintenance record worksheet in the manual to document all tasks completed.

NOTICE:

Maintenance schedule may vary for individual users due to different situations and safety

requirements.

Task

Frequency

Inspect the power switch, cord, and plugs for signs
of failure.

Every day before any operation begins.

Inspect the sanding belt for signs of failure.

Every day before any operation begins.

Clean the sanding belt with a belt cleaning stick.

When the sanding belt is clogged.

Remove dust accumulated on/inside the machine. Weekly

Clean and lubricate gears and shafts.

Monthly

Apply rust protectant on cast iron tables.

Monthly

Inspect and clean sanding belt drums.

Monthly

Bearings

Bearings are sealed and lubricated. They do not
require lubrication.

WARNING

Disconnect the machine from the power source before any maintenance work is
performed. After servicing the sander, remove all tools before restarting the
machine. Failure to comply can cause serious injury!

«
...
27
28
29
30
31
...
»

Содержание 6320

























































Отзывы:

Нет отзывов