Oliver 6320, Руководство пользователя, Страница: 24 / 56

24 | Page Oliver Machinery 6320 Sander
Adjustments
Belt Tilt Digital Readout Initialization
1. To initialize the digital readout, move the
sanding belt to the upright position. Use a
square to verify the belt is perpendicular to
the table, then press the
“ ZERO ” button.
2. Once initialized, the digital readout displays
the tilt angle of the sanding belt relative to
the table.
NOTE : The “ SET ” button of the readout is not
assigned with any functions.
Sanding Belt Tilt Adjustment
The sanding belt can be tilted to create a bevel
on the workpiece.
1. To adjust the belt tilt, unlock the belt tilt
handwheel.
2. Use the handwheel and the digital readout to
set the desired tilt angle.
3. To minimize the gap between the table and
the sanding belt, unlock the horizontal travel
handwheel and move the table towards the
sandbelt. Make sure the table does not touch
the belt, as this will damage the table.
4. Lock all handwheels after the adjustment.
IMPORTANT
Move the table away from the sanding belt before moving the belt back to the
upright position. Failure to do so can damage the machine.